How Florida's UV Destroys RV Skylights
RV skylights and vent covers are molded from ABS plastic or polycarbonate - materials that are reasonably UV-stable in temperate climates but degrade significantly faster in Florida's high-UV environment. Florida receives among the highest UV index readings in North America - comparable to parts of Arizona and far exceeding the UV exposure of the Midwest and Northeast where most RVs are manufactured and tested.


The degradation process is visible and progressive. New RV skylights are optically clear or white and pliable.
As UV exposure accumulates, the plastic first yellows (carotenoid compounds forming in the degraded polymer), then hazes, then becomes increasingly brittle. Brittleness is the critical stage - a skylight that has become significantly brittle is prone to cracking from impacts that would not affect a newer unit, from thermal stress as the dome expands and contracts with temperature changes, or simply from the physical pressure of cleaning.
Winter Haven RVs stored outdoors can experience this full degradation cycle in 5 to 8 years, compared to 10 to 15 years in northern climates. If your skylight is yellowed, opaque, or shows any surface cracking, it should be evaluated for replacement before it cracks through under rain pressure.
Signs Your RV Skylight Needs Replacement
Several symptoms indicate a skylight that is due for replacement.
Visible yellowing or hazing that reduces light transmission - the skylight is doing its job of passing light but is nearing the end of its structural integrity.
Surface cracking on the dome exterior - hairline cracks on the surface of the dome indicate UV embrittlement that will progress to through-cracks under rain pressure or temperature cycling.
Cracked or broken frame or mounting ring - the perimeter frame can crack separately from the dome, compromising the structural integrity of the skylight-to-roof connection.
Water staining on the ceiling near the skylight - active leaking through the perimeter seal or through a crack in the dome or frame.
The vent cover does not fully close or latch - the latch mechanism has failed, allowing the cover to open during rain or wind events.
RV Skylight Replacement Types
RV skylights come in several configurations that determine the replacement approach.
The most common is the replacement dome only - where the existing frame is in good condition and only the clear dome portion requires replacement. This is the most cost-effective option when applicable.
Complete skylight unit replacement is required when the frame is cracked, the mounting flange is damaged, or when the skylight model is being discontinued. We replace the entire unit in these cases, including a new frame, dome, and mounting hardware.
Vent fan skylights - units that combine a vent opening with a powered or manual fan - require attention to the fan wiring during replacement. We disconnect, protect, and reconnect the fan wiring as part of the replacement procedure.
The Skylight Replacement Process in the Field
Skylight replacement is a rooftop job that we perform on-site at your Winter Haven location. We access the roof, remove the old skylight or dome, clean the mounting surface, and install the replacement with a fresh butyl tape seal and appropriate fasteners. All rooftop penetrations are sealed with Dicor 501LSW lap sealant around the full perimeter of the new frame as the final step.
For bathroom skylights with interior light trim rings, we coordinate the trim ring fit with the new skylight dimensions - not all replacement skylights are identical in size, and we ensure the interior ceiling opening is properly covered and the trim ring fits correctly before closing the job.
We test every replacement skylight with a water flow test before declaring the job complete - running water around the perimeter and verifying no infiltration occurs at the frame-to-roof junction.